Skip to content

Cost Estimate

Curious on what your 3D print might cost? Try the estimator below!
Upload an .stl file to see the cost estimate and adjust the infill density.

When you’re ready to print, enter your email and click the “Request a Quote” button.
I’ll get back to you as soon as I can!

Setup: $1/print
PETG Colours: 10¢/gram
Unique Materials (Glow-In-The-Dark, Nylon, Flexible):20¢/gram

Loading file

Upload Click here to upload or drag and drop your model to the canvas.

The model is too large and has been resized to fit in the printer's build tray. [Hide]

The model is too large to fit in the printer's build tray. [Hide]

The model is too large, a fitting printer is selected. [Hide]

The model is too small and has been upscaled. [Hide]

Warning: The selected printer can not print in full color [Hide]

Warning: obj models with multiple meshes are not yet supported [Hide]


File Unit:    mm    inch
Scale:
%
 
× ×  cm 

	

	

	

	  	
	


	
     

		

			

				
					Material Volume:
				
				
					 cm3				
			

			

				
					Box Volume:
				
				
					 cm3				
			

			

				
					Surface Area:
				
				
					 cm2				
			

			

				
					Model Weight:
				
				
					 g				
			

			

				
					Model Dimensions:
				
				
					 x  x 
					cm				
			


		

	





	

		

			

			        Estimated Price:				
			

		

	


	

				
		
		
		
		
		
		
		
		
		
		
		
		
		
                		

			Loading price
		


		

			

				

					
					
					

					

					
				

			

		

	




(25×21×21 cm) (9.84″×8.3″×8.3″)
Soft feel, flexible filament
Translucent turquoise-like colour
Glows in the dark
	

		

			Material
			
    

  • PETG - White
  • PETG - Grey
  • PETG - Black
  • PETG - Red
  • PETG - Orange
  • PETG - Yellow
  • PETG - Green
  • PETG - Blue
  • PETG - Violet
  • TPE - Black - 85A
  • PETG - Translucent Sea Green
  • PETG - Matt Brown
  • PETG - Matt Olive
  • Nylon6 - Glass-filled
  • PETG - Glow-in-the-dark Blue (off white)
    • 			

		

	
	

		

			Printer
			
    

  • Prusa Mk3S+ (25×21×21 cm) (9.84″×8.3″×8.3″)
    • 		  	

	  	

	
	






















Equipment & Limits





Equipment:
– The Original Prusa i3 MK3S+

Limits:
– Build volume (x y z): 25×21×21 cm (9.84″×8.3″×8.3″)
– Materials: PLA, PETG, TPE, Nylon (PA6-GF)
– Support material: same as print. Supports not removed.
– Colour & Material availability: see cost estimator









PLA
General-purpose (indoors)
Recyclable bioplastic (#7)
Strong but has sudden failure
Temperature limit: 60°C
Print longevity: a few years
Highest level of detail









PETG
General-purpose (indoor/outdoor)
Recyclable (#1)
Strong and fails gradually
Temperature limit: 80°C
Print longevity: excellent
Good level of detail









TPE (Shore 85A)
General-purpose flexible; elastic
Acceptable for outdoor (UV, moisture)
Best for o-rings, gaskets, tires, etc.
Temperature limit: 70°C
Non-recyclable
Chemical resistant: Oil, fuel, hydrogen peroxide, (Degraded by: chlorine)
Print longevity: excellent
Low level of detail









Nylon (PA6-GF)
High temperature, strength, and wear resistance
Used in vehicle engine bay parts, chair glider feet, structural components, dishwasher parts.
Poor UV resistance (indoor only)
Strongest
Temperature limit: 180°C
Non-recyclable
Chemical resistant: Oil, fuel, hydrogen peroxide, (Degraded by: chlorine) 
Print longevity: excellent
Good level of detail






 Loading